Premature termination of workflow - how to do it?

0

Hi Rafał,

you are right, you need to have a path that leads from one step to another. You can not simply "jump" between steps.
If you need to do /execute actions you can either execute them in the OnEntry of the final step or create an automation and use this automation in the steps.

If you don't want to the path in the diagram, you can hide them.


That being said, I don't know PercussionPowerFlow, in WEBCON there is no actual "termination". You can always move the workflow back /forward to another step.

Best regards,
Daniel

As Daniel already said, there is no such thing in Webcon.

There is one Exception - you can configure single path on a step, which returns to a previous step, so it's not connected to a specific one.
In this place, you can choose 'Previous step', as a destination: https://docs.webcon.com/docs/2023R3/Studio/Workflow/Step/Path/Step_Paths#5-destination-step

I'm currently creating 'Terminate' paths from basically all steps, to 'Terminated' step, for all workflows.
Even when users says there is no need, there soon will be, and It's good to have them hidden under Admin button ;)

A tip to make it less tedious - configure single path, and then just copy it, no need to configure it from ground up on each step.